KEIN Front Fender Braces for Subaru Impreza 3rd gen | GH GR GE GV

  • Product Code:
  • Product Article:
  • Rating:
  • Availability:

    In Stock

207,51 €

currency on the site: Euro (EUR).
Shipping already included in the cost of good FREE WORLDWIDE SHIPPING

New at RisingTuning, the KEIN front fender reinforcement brace kit for Subaru Impreza 3rd generation (2007-2014).
First introduced in Japan and developed specifically for motorsport competition, these spacers are also known as "Gacchiri Support".
KEIN fender braces are designed to suppress deformation of the front frame by mounting it to the inner fender frame - thereby adding rigidity to the body.
It minimizes body deformation during sporty driving styles and when cornering, it increases suspension and suspension efficiency and improves handling.
KEIN fender brace kit is designed specifically for motorsports, the development of the brace was based on the principle: ultra-lightness and maximum rigidity.
And also as one of the bonuses of the front fender brace: It is a compensation and overall improvement of the stiffness of the body "tired metal", especially relevant for bodies that are more than 10 years old. So you can slow down the aging of the body and not only lose the factory characteristics but also increase them.

Item content:

• KEIN Front Fender Brace kit for Subaru Impreza 3 gen - 4 pcs. (Left & Right)
• Fasteners included

• Significant Improvement in overall vehicle handling
• Increased steering responsiveness
• Significantly reduces body flex in corners and over bumps
• Compensates and improves the stiffness of the old body (removes "tired metal" properties)
• Increases the overall strength of the body's power components at the front of the vehicle through 10 connection points.

• Bolt-on
• Material: Steel
• Welding Procedure: MIG
• Surface finish: Professionally powder-coated.
• Hardware metric grade 8.8-12.9 zinc
• Tested on the track and on the street.

• Mounts under the front fender, attaches to the door hinges and OEM mounting points of the factory strut, replacing it with a rigid triangular structure.
• Remove these standard fender reinforcements when present on the vehicle on WRX / WRX STI versions (OEM parts), to install KEIN power fender spacers:
Right : 50866FG0209P
Left : 50866FG0309P
• No additional fasteners or tabs are needed for installation, everything you need is included.
• No drilling or welding required!
• You may have to trim the foam under the fenders.
• The only difficulty may be installing the tab through the hole, with the wiring running, between the door hinges.
• After installing the kit, the door hinges must be adjusted.

Weight: 3.5kg.

This fender braces is compatible with this cars:

Short: All Subaru Impreza 3rd gen 2007-2011/ WRX STI 2007-2014 (GE, GV, GH, GR)


Europe & World:
Subaru Impreza [GH,GR|G12|G22],
 3 Gen, Hatchback, 04.2007 - 06.2012, Body: GH, GH2, GH3, GH7
Subaru Impreza [GE,GV|G12|G22], 3 Gen, Sedan, 04.2007 - 06.2012, Body: GE3, GE7

Japan & World:
Subaru Impreza [GH,GR|G12|G22],
 3 Gen, Hatchback, 04.2007 - 12.2011, Body: GH8, GH2, GH3, GH6, GH7
Subaru Impreza [GE,GV|G12|G22], 3 Gen, Sedan, 04.2007 - 06.2012, Body: GE2, GE3, GE6, GE7


Europe & World:
Subaru Impreza WRX [GH,GR|G12|G22],
 3 Gen, Hatchback, 09.2007 - 04.2011, Body: GH
Subaru Impreza WRX [GE,GV|G12|G22], 3 Gen, Sedan, 09.2007 - 04.2011, Body: GE
Subaru Impreza WRX [GH,GR|G12|G22], 3 Gen Facelift, Hatchback, 05.2011 - 05.2013, Body: GH
Subaru Impreza WRX [GE,GV|G12|G22], 3 Gen Facelift, Sedan, 05.2011 - 02.2014, Body: GE


Europe & World:
Subaru Impreza WRX STI [GE,GV|G12|G22],
 3 Gen, Sedan, 10.2007 - 04.2011, Body: GE
Subaru Impreza WRX STI [GH,GR|G12|G22], 3 Gen, Hatchback, 10.2007 - 04.2011, Body: GR
Subaru Impreza WRX STI [GH,GR|G12|G22], 3 Gen Facelift, Hatchback, 05.2011 - 07.2013, Body: GR
Subaru Impreza WRX STI [GE,GV|G12|G22], 3 Gen Facelift, Sedan, 05.2011 - 02.2014, Body: GE

Japan & World:
Subaru Impreza WRX STI [GH,GR|G12|G22], 3 Gen, Hatchback, 10.2007 - 06.2010, Body: GRB, GRF
Subaru Impreza WRX STI [GH,GR|G12|G22], 3 Gen Facelift, Hatchback, 07.2010 - 08.2014, Body: GRB, GRF
Subaru Impreza WRX STI [GE,GV|G12|G22], 3 Gen Facelift, Sedan, 07.2010 - 08.2014, Body: GVB, GVF

Years of issue Impreza: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

KEIN division has its own engineering department and are our direct partners, the RisingTuning team. All products created by KEIN are modeled in CAD where the factory drawings of the suspension are used to create the part, thus achieving maximum accuracy in measurements when creating the part. Before the prototype all stresses and loads are measured in simulation in order to identify the most reliable and correct design solutions taking into account the steel grade and the upcoming not only direct loads but also the natural environment - the correct alloy, steel thickness and its additives are selected to give the required properties to the product. After identifying the best solutions a prototype is created which undergoes physical tests and only after successful tests the finished serial products are created.

  • Subaru
    • Impreza / WRX STi
      • III 2007-2014 (GH, GE, GRB)


Product rating KEIN Front Fender Braces for Subaru Impreza 3rd gen | GH GR GE GV

Leave a product review and get a coupon for your next purchase in our store

You may also like