Rear Middle trunk spoiler for Subaru Forester SG 2005-2008 | S11 | SG9 SG5 SG6
- Product Code: SRDSGR
- Product Article: product-580
Stylish and classic STI style trunk spoiler for restyled version of Subaru Forester SG, this spoiler is analogous to OEM part J1217SA000. The spoiler is made of high quality ABS plastic.
Middle trunk spoiler wing for Subaru Forester SG (2005-2008) - 1pc.
*Analog of J1217SA000
If you have a car 2002-2005 years, you fit the spoiler version before the restyling for Subaru Forester SG, be careful they differ in shape
Installation is very simple, the wing can be installed on double sided 3M automotive adhesive tape or it can be installed on black glass automotive sealant. Be sure to wait until the part dries after painting, and before installing be sure to degrease the surface for best adhesion, good luck enthusiast!:)
This trunk spoiler is compatible with this cars:
USA / World:
Subaru Forester SG / S11, 2 Generation Restyling, SUV 5-doors, Body: SG6, Years: 01.2005-06.2008
Europe / World:
Subaru Forester SG / S11, 2 Generation Restyling, SUV-5 doors, Body: SG5, SG9L, Years: 01.2005-02.2008
Japan / World:
Subaru Forester SG / S11, 2 Generation Restyling, SUV-5 doors, Body: SG5, SG9, Years: 01.2005-11.2007
*Only for cars after restyling
Years: 2005, 2006, 2007, 2008
Features of this product:
• Made of ABS plastic, this is not FRP
• Material thickness 3 mm
• Bolt on!
• Surface finish: Black glossy, no adjustment is needed, just paint
• This spoiler can be fastened with 3M double tape & Black glue.
• The product is unpainted. Therefore can have small scratches and pimples. Use without coating or painting is not provided.
• We do not offer work to painting car parts to export.
Advantages of ABS plastic:
Optimal combination of shock resistance and elasticity provides longevity of the products.
• Under light torsion loads plastic elements restore their original shape without residual deformation.
• High dimensional stability which allows manufacturing of complex molded products with high accuracy.
• Good adhesion to paint materials, which allows them to paint products in any desired color.
Material of this Spoiler:
Different materials are used for manufacturing car tuning elements, the beauty, practicality and durability of the parts depend on their properties. To make you satisfied with the results, Rising Tuning manufactures and procures car parts including ABS plastic, a polymer that differs favorably from other materials. This plastic demonstrates increased impact resistance, in which it surpasses styrene copolymers - polystyrene. This material is also characterized by mechanical stiffness and strength, wear resistance and resistance to deformation and melting in short-term heating up to 100 degrees Celsius. At temperatures up to 70-80 degrees Celsius, products made of this polymer can be used for a long time without their qualities deteriorating and while maintaining dimensional stability. These properties allow to use ABS plastic for manufacturing of the most various elements of car body
- II 2005-2008 (SG)