Snorkel kit for Toyota HiAce | 100 Series | 1989-2004
- Product Code: HIACE
- Product Article: product-1443
The principle of the snorkel is very simple. Any engine needs a supply of clean air, since its operation is based on ignition of the fuel-air mixture in the engine cylinders. Clean air enters the engine through air intakes, in a typical car located at fender or hood level. In adverse conditions the intake of clean air can be difficult:
• On dusty (sandy) roads, the air intakes take in air that the air filter can't handle;
When crossing water obstacles, there is a risk that the air intakes will be flooded with water.
The first problem threatens to quickly foul the air filter and get dust and dirt into the engine cylinders, as well as reducing the volume of air flowing into the engine combustion chambers. As a result, the fuel-air mixture ratio is disturbed and oxygen starvation of the engine begins. As a result, the fuel does not burn completely, which leads to a reduction in engine power, and in the long run, threatens its repair.
• The second problem is even more troublesome. The ingress of water into the air intakes and then into the engine combustion chambers is called engine water hammer. Since water is an incompressible object, the water plug formed in the cylinder leads to multiple increases in pressure. The moving piston, trying to complete the stroke, destroys the cylinder. The result of water hammer can be broken pistons, bent connecting rods or a ruptured cylinder block. In most cases, a water hammer completely destroys the cylinder-piston group of an engine.
- Made of high-quality LLDPE plastic (this is not FRP)
- Material thickness 3 mm
- Surface finish: Black textured can be used as
- Easy to install item, It fits perfectly!
Properties of the snorkel material:
The main advantages of LLDPE compared to other polyethylenes are high physical and mechanical properties, higher chemical resistance, better performance at low and high temperatures, greater surface gloss and greater resistance to cracking. LLDPE has higher elongation at break and tensile strength. Its higher melting point of 118°C makes it suitable for packaging hot products. Unlike HDPE it can withstand higher elongation ratios. Characterized by good elasticity of the melt due to many short lateral branches, which when deformed as if sliding over each other, without developing significant internal stresse
One snorkel with fitting kit
Car models compatible with this snorkel:
• Toyota Hiace 1989-2004 ( KZH100G, KZH106G, KZH106W, KZH110G, LH100G, LH102V, LH103V, LH104, LH105, LH107G, LH107W, LH108, LH109V, LH110G, LY101, RZH100G, RZH101G, RZH102V, RZH103, RZH104, RZH105, RZH109, RZH110G, TRH102V, YY101, LH102, RZH102 )
Years compatible - 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004.
Possible fit for body:
KDH200K, KDH200V, KDH202L, KDH205V, KDH212L, KDH220K, KDH222B, KDH222L, KDH225K, KDH227B, KDH228B, KLH12, KLH22, KZH116G, KZH120G, KZH126G, KZH132V, KZH138V, LH113K, LH113V, LH114, LH115, LH119V, LH123V, LH129V, LH162V, LH164, LH166, LH168V, LH172K, LH172V, LH174, LH176 LH178V, LH182K, LH188K, LXH12, LXH22, RCH13, RCH23, RZH111G, RZH112K, RZH112V, RZH114, RZH115, RZH182K, RZH183K, TRH112K, TRH112V TRH122K, TRH124B, TRH200K, TRH200V, TRH203L, TRH213L, TRH214W, TRH219W, TRH221K, TRH223B, TRH223L, TRH224W, TRH226K, TRH228B, TRH229W
Features of the installed snorkel for Toyota Hiace :
• Improve airflow into the engine, allow cleaner air into the engine, help the engine breath easier.
• Raise the air-intake above the water level.
• Fuel saving
• Protect engine, improve the performance of your 4x4.
• The Cool Factor, a snorkel on your 4x4 does look ultra cool.
- IV 1989-2004 (H100)